AC/DC 2600W DIFFUL SOLAR PUMP solar water pump supplier shielded motor solar pump with water filled for irrigation
- Model
- 4DFS27-38-2600
Item specifics
- Type
- Shielded water-filled motor solar pump
- Pump Body Material
- 304 Stainless steel
- impeller Material
- 304 Stainless steel
- Application
- Poultry Farming,Irrigation,Drip Irrigation
- Package type
- wooden case
- Warranty
- 2 years
Review
Description
3.5hp(2600w) ac/DC SHIELDED WATER-FILLED MOTOR SOLAR water PUMP WITH S/S IMPELLER
|
Model
|
DC Voltage range | AC Voltage range |
Power
|
Max flow
|
Max head
|
|
4DFS27-38-2600
|
60-380Vmp （60-440VOC） | 90-240VAC |
2600W
|
27m3/h
|
38m
|
|
Outlet
|
Pump size | Cable |
PV
|
Connection mode
|
Pump body
|
|
2”
|
4” | 2m |
330W*9
|
in series
|
4DFS14/3
|
SHIELDED WATER-FILLED MOTOR ADVANTAGE
- Motor with antifreeze and deionized water mixture. Will not cause any water pollution.
- The coil is a fully enclosed structure and filled with epoxy resin. The motor is not easy to be damaged, and the service life is prolonged.
- Submerging depth can reach 150 meters.
- Graphite bearings are waterproof, wear-resistant, and have a long service life.
- Pottery-plated rotor shaft, not easy to rust, wear-resistant, long service life.
- Advanced brushless dc motor, saving energy and offering maximum.
Built-in intelligent controller ADVANTAGE
- Built-in controller, with MPPT and DSP Technology, offering the easiest and simplest installation.
- Intelligent frequency conversion algorithm, maximizing efficiency and saving energy.
- Can be powered from solar panels, mains, or power generators, guaranteeing operation day or night.
- In DC mode, the MPPT function can achieve over 99% efficiency.
- In AC mode, the power factor correction function can make the power factor exceed 0.99.
- Dry-running protection, Reverse protection, Over-load protection, Over-current protection, Over-voltage protection, Phase loss protection.
HOW TO CHOOSE A PUMP
Confirm you technical requiremt
How deep is your well(bore hole)?
How far is the distance between tank and well?
What's you requirement about the flow(L/H)?
Compare your requiremt with out product
Calculate"Actual Pump Head"and find the proper pump with the right head.
Then you can choose the pump you want according to different folw and prices.
